Follow this link to see a list of websites, which I have used during this project.
Friday, 11 February 2011
Arthur, D. (1993). Modelling in Clay and other materials. London. A&C Black.
Carlson, M. (2000). Family & Friends in Polymer Clay. Ohio. North Light Books.
Carrington, J. (2000). 1/12 Scale Character Figures, for the doll’s house. East Sussex. Guild of Master Craftsmen Publications Ltd.
Kracov, D. (2001). Modelling with Polymer Clay. California. Walter Foster Publishing, Inc.
Lanteri,E. (1988). Modelling and Sculpting the Human Figure. London. Chapman & Hall.
Lucchesi, B. Malmstrom, M. (1979). Modelling the head in clay. New York. Watson-Guptill Publications.
Neat, D. (2008). Model-making Materials and methods. Wiltshire. The Crowood Press Ltd.
Rubino,P. (1997). The Portrait in Clay. New York. Watson-Guptill Publications.
Waite Brown, C. (2007) Bible of Sculpting techniques, An illustrated guide for beginners. London. A & C Black.
I cut out styrene outline of the front view and the side view so that I could keep comparing the shape and size of my model. I chose to do this sculpt because it was much more angular than the other two and showed a different skill. I got these straight edges and angles by using a scapel to carve pieces of sculpey away. I also used lighter fluid to blend in edges.
When it came to doing the head the armature underneath was not sturdy enough a so i bulked it out using milliput as a base.
The final model was not completed and I was not happy with the standard of the model. Although this can only be expected from a rushed sculpt. I did produce a small maquette of the head before christmas which is shown below just to give an example of what the head might have looked like.
Sunday, 6 February 2011
I began my sculpt by gaining the initial shape of the figure. Using my calipers I measured out certain aspects such as the chin to tip of the nose reference, the width of the head and the eyebrow level. Underneath this was a wooden armature. Using the Chavant NSP medium was difficult at first because it is hard but heating it with a heat gun made it melt down more to a butter like consistency. I was then able to spread it onto the armature and build up the shape quickly. If there was one thing I would have done differently then it would have been to build out from the armature more before applying the NSP because it would have saved me a lot of clay.
I kept refining the shape of the face and head, turning the sculpt frequently to make sure that it was not flat and measuring distances every now and then. Another technique I used was to build areas up with small smudges of clay so that I could build up areas easier.
Next I added the ears. In a sculpting class last year we were taught one method where the ears, eyes and hair come last. However I felt that I needed the ears to get the jaw line right so I put them in which personally I found quite helpful. One thing about Peter Cushings face is that his cheek bones are very prominent and his face shape is very skeletal. I had to make sure that these angle were right throughout the sculpt. Occasionally this meant that I would draw lines with my tool on to the surface of the clay to show myself how the face was built up and see more clearly the planes of the face.
To do the eyes I tried using a few different techniques that I had either been shown, read about or watched online. The best one for me was to scoop out the eye sockets and place larger eyeballs in, sculpting onto the ball with the eyelids. This part of the sculpt was by far the hardest as positioning the eyes was very difficult. I probably positioned them 4 separate times before I got them level with each other and the right width apart. Another thing that I did was to put a very rough hair line in so that I could amend the forehead and facial shape as it helped to have that extra reference point.
Here are pictures of the final sculpt. Although it is not finished to the standard that I would like due to time constraints, I am pleased with the outcome as I have improved my realism skills and learnt more about the way that the material works and the techniques behind doing a likeness.
Saturday, 5 February 2011
Many sculptors are focused towards the fine art industry, producing installations and exhibiting their work to art critics and the public. Sculpting is an art form, highlighting talent, creativity and skill. However that art form can sometimes be lost in industry. I was told on a company visit by a sculptor that "it is always money that defines how creative you can be. If you cannot accept this then you fall in to the fine art category." This is where the art world and the commercial side differ as sculpting from a fine art perspective is more about a creative outlet and for those who want to express their thoughts, feelings and views. Although many of these artworks do make money.
This sculpture of Damian Hurst committing suicide was done by Eugenio Merino it is a comment on how he values money, portraying how the only way that Hurst could make any more money out of his work would be if he were to kill himself, which proved to be very a striking and controversial piece of art.